Block Paving Cleaning and Sealing

drives before after

The investment we have made in our pressure washing equipment specifically designed for block paving cleaning guarantees spectacular results.

Homeowners and many business premises have throughout the UK installed many millions of square feet of block paving. The product transforms the areas with which it has been layed, however without regular maintenance these very costly installations soon become very dirty, weed infested and generally very “drab and tired” in appearance. The “drive by appeal” and “first impressions count” sayings used by many estate agents can fail miserably if your driveway or patio area is not regularly cleaned and maintained.

At our initial FREE site visit BustaGrimes will ascertain and discuss with you a recommended course of action. If the area is exhibiting excessive weed, moss or algae growth we will pre-treat the site with a weed killer or fungicidal wash and then leave for approximately 7 days to enable the treatment to become fully effective. If any oil or diesel staining is in evidence this would be treated at the same time and the treated area covered to allow the chemical cleaner to absorb as much of the spillage as possible.

After a suitable period of time we will conduct a full pressure wash of the entire area removing the remaining weed growth along with residual moss and algae infestations. We recommend that both freshly cleaned and new installations are sealed to keep weed growth to a minimum, enhance the colour structure of the product and alleviate any soiling from oil stains etc. For clean only work we will return to re sand the the area when weather conditions permit.

For customers requesting the sealant service we will leave for 3-5 days to ensure as much moisture has evaporated before reintroducing the kiln dried sand and applying the first of two coats of top quality sealant. This period of drying is vital do not be mislead by contractors who suggest they can seal “the next day” as the sealant will take on a milky appearance, this is where moisture is trapped beneath the sealer.

Following the second coat application it is recommended that vehicles are kept off the area for 24 hours and foot traffic is kept to a minimum for 2-3 hours following the last coating.

For a FREE quotation for any block paving Cleaning, driveway Cleaning, imprinted concrete, tarmac or areas that you need pressure washing, cleaning, sealed and restored then please call Busta Grimes on 0800 206 2383 or click here and complete our on line enquiry form and we will get back to you as soon as possible.

As a well established Roof and Driveway Cleaning Company we have a large customer base for all types of driveway cleaning, Driveway Sealing, Block Paving Cleaning, Block paving sealing, tarmac cleaning, Tarmac Sealing, Imprinted Concrete Sealing and Decking, Patio Cleaning through out Chester, Cheshire, Flintshire, North Wales and the WIrral including Bangor, Llandudno, Llanrwst, Colwyn bay, Rhyl, St. asaph, Denbigh, Ruthin, Holywell, Flint, Mold, Llay, Wrexham, Whitchurch, Nantwich, Crewe,  Winsford, Congleton, Northwich, Manchester, Warrington, St. Helens, Huyton, Liverpool, Hoylake, Heswall, Birkenhead, Ellesmere port, chester chester.

Comments are closed.